Upgrading to 1.0 from a 0.x release
Before 1.0, a minor release can carry a breaking change. A rename takes effect in one release, with no deprecated alias and no runtime warning. Below is every breaking change on the way to 1.0, each as one row from what your code does now to what it does after.
This guide covers upgrades from 0.51.x to 1.0.0 (0.52.0, 0.53.0, 0.54.0, 0.55.1, 0.56.0, 0.57.0, 0.58.0, 0.59.0, 0.60.0, 0.61.0, 0.62.0, 0.62.2, 0.63.0, 0.64.0 and 1.0.0, not yet released). Breaking changes before 0.52.0 are in the package's CHANGELOG.md. The list grows with each pre-1.0 minor until 1.0 ships.
How to use this guide
- Find your current release, then apply every row with a later Since release, in order.
- The compiler finds most rows for you, because a removed or renamed name is a type error. Rows marked behaviour compile unchanged but draw or answer differently, so check those by hand.
- Upgrade the plugins with the SDK. Each one declares the first SDK release it needs, listed under Plugins.
Installing
| Since | Before | After |
|---|---|---|
| 0.58.0 | the SDK parsed colours itself | culori v4 is a peer dependency: npm 7+ and Yarn install it, pnpm needs auto-install-peers=true or pnpm add culori |
| 0.58.0 | maplibre-gl ^6.9.0, zod ^4.4.3 |
maplibre-gl ^6.11.2, zod ^4.6.5 |
Core
| Since | Before | After |
|---|---|---|
| 0.52.0 | asSoftWaypoint(position, radiusMeters) |
removed: every waypoint is a stop, and WaypointProps.radiusMeters is gone |
| 0.55.1 | a reverse geocoding result's properties.accessPoints |
properties.entryPoints, an EntryPoint[] whose type is optional |
| 0.58.0 | TomTomConfig.instance.put({ trackingId }) |
removed, with the Tracking-ID header |
| 0.58.0 | apiVersion on TomTomConfig or on a routing call |
removed: each service calls the API version it pins |
| 0.58.0 | TextWithPhonetics, with phonetic and phoneticLanguageCode |
InstructionText, with text only |
| 0.58.0 | POICategory V2 names: GAS_STATION, ELECTRIC_VEHICLE_STATION, HOTEL_MOTEL, SHOPPING_CENTER, SUPERMARKETS_HYPERMARKETS, and 62 more |
their Places Search v3 names: FUEL_STATION, CHARGING_LOCATION, HOTEL_OR_MOTEL, MALL, SUPERMARKET, … |
| 0.58.0 | COLLEGE_UNIVERSITY, LEISURE_SPORTS_CENTER, OPEN_PARKING_AREA, PERFORMING_ARTS_THEATER, ROAD_TRAFFIC_CONTROL_CENTER |
COLLEGE_OR_UNIVERSITY, SPORTS_CENTER, OPEN_CAR_PARKING_AREA, THEATER, TRAFFIC_CONTROL_DEPARTMENT |
| 0.58.0 | PUB_FOOD, POLYNESIAN_RESTAURANT, OTHER_WINTER_SPORT, SNOOKER_POOL_BILLIARD |
removed: filtering on one already matched nothing |
| 0.58.0 | TrafficIncidentTMC, TrafficIncidentTMCPoint, properties.tmc on an incident |
removed: Traffic Incident Details v2 carries no TMC data |
| 0.58.0 | one AreaAnalyticsTimedEntry type |
one entry type per granularity, AreaAnalyticsYearlyEntry to AreaAnalyticsHourlyEntry and AreaAnalyticsAverageEntry, with their time fields required |
| 0.58.0 | AreaAnalyticsFeatureProperties.timezone always set |
optional |
| 0.59.0 | AreaAnalyticsFeatureProperties.name always set |
optional, and absent from the SDK's requests |
| 0.59.0 | ChargingPoint.evseId always set |
optional: some operators publish none |
| 0.61.0 | View, views |
GeopoliticalView, geopoliticalViews (Geopolitical views) |
| 0.62.2 | behaviour: the route progress helpers placed a point between two progress entries by vertex count |
by the line's length. On a winding route, a distance or time between entries moves by up to a couple of kilometres or minutes |
| 0.64.0 | bboxExpandedWithPosition, bboxExpandedWithBBox, bboxExpandedWithGeoJSON, toPointFeature |
no longer exported: they were internal; bboxFromGeoJSON and bboxFromBBoxes build a bounding box |
| 0.64.0 | mergeFromGlobal, TomTomHeaders, generateTomTomHeaders, bboxOnlyIfWithArea, getPositionStrict, toPointGeometry, poiCategoriesToID, poiCategoriesToIDs, poiIDsToCategories, getRoutePlanningLocationType, iconToTrafficIncidentCategory, trafficIncidentToIconCategory, MILE_IN_METERS |
not in the published types: they are internal to the SDK's packages; isBBoxWithArea tells a bounding box with area, getPosition reads a position |
| 0.64.0 | RouteSummary and LegSummary with batteryConsumptionInkWh, batteryConsumptionInPCT, remainingChargeAtArrivalInkWh, remainingChargeAtArrivalInPCT, fuelConsumptionInLiters, and totalChargingTimeInSeconds on the route; ElectricSummary, CombustionSummary, SummaryWithConsumption |
removed: routes are planned without a vehicle consumption model |
| 0.64.0 | LegSummary.chargingInformationAtEndOfLeg, ChargingStop, ChargingStopProps, ChargingConnectionInfo, ChargingPaymentOption, PaymentMethod, paymentMethods, PlugType, plugTypes |
removed, with long-distance EV routing |
| 0.64.0 | ChargingPark.availability, ChargingPoint.status, ChargingParkWithAvailability, EVChargingStationWithAvailabilityPlaceProps, ChargingStationsAvailability, ChargingPointAvailability, ConnectorAvailability, ChargingPointStatus, chargingPointStatus, ChargingStationsAccessType, chargingStationAccessTypes |
removed, with real-time EV charging availability: chargingPark.connectors and chargingPark.chargingStations keep the static station data |
| 0.64.0 | StaticChargingPoint, ChargingStation<P> |
ChargingPoint, which has no status, and ChargingStation, which takes no type parameter |
| 0.64.0 | place.properties.dataSources.chargingAvailability, ChargingAvailabilityDataSource |
removed: nothing reads the id any more |
| 0.64.0 | the reachable-range budgets remainingChargePCT, spentChargePCT, spentFuelLiters, in BudgetType, budgetTypes and budgetUnits |
removed: a budget is timeMinutes or distanceKM |
Services
Configuration and requests
| Since | Before | After |
|---|---|---|
| 0.57.0 | the places services sent key= in the URL |
they send TomTom-Api-Key and TomTom-Api-Version headers, which a proxy has to forward |
| 0.58.0 | calculateReachableRange and trafficIncidentDetails sent GET URLs |
they send the key, version and language as headers, and reachable ranges use POST |
| 0.58.0 | customizeService, and a service function's second argument overriding its request or response handling |
removed; calculateReachableRanges keeps its options argument |
| 0.59.0 | customServiceBaseURL on a call |
removed: every service builds its URL from the global commonBaseURL |
| 0.59.0 | apiVersion passed per call or through TomTomConfig.put |
ignored |
| 0.64.0 | error instanceof SDKServiceError && error.status === 403, and the other status checks |
error.code === 'API_KEY_REJECTED', one of the error codes every SDKError carries. status stays |
| 0.64.0 | new SDKError(message, service, issues) |
new SDKError(message, service, { code, issues }) |
| 0.64.0 | ServiceTemplate, ParseResponseError, ParsedFetchResponse, RequestOptions, parseDefaultResponseError, buildResponseError, buildValidationError |
no longer exported: they were internal to the service call pipeline |
| 0.64.0 | a commonBaseURL on http:, such as http://proxy.example.com |
serve it on https:. Otherwise, service calls reject and new TomTomMap throws with INSECURE_BASE_URL. Only loopback addresses keep http: (commonBaseURL) |
| 1.0.0 | the error codes 'API_KEY_REJECTED', 'SERVICE_UNAVAILABLE', 'NETWORK_ERROR' and 'UNEXPECTED', on services and the map |
'INVALID_CREDENTIALS', 'LIVE_SERVICE_NOT_AVAILABLE', 'NETWORK_NOT_AVAILABLE' and 'INTERNAL', the names the TomTom Navigation SDK gives them |
| 1.0.0 | error.code === 'API_KEY_REJECTED' for a 403 |
'INSUFFICIENT_PERMISSIONS'. The key is valid but not allowed the request, such as a Private Preview API it lacks access to. 'INVALID_CREDENTIALS' is a 401 only, on services and the map alike. behaviour |
| 1.0.0 | a 403 rejected with the message 'Request failed with status code 403' |
it keeps the API's message, and SDKServiceError.apiErrorCode holds the API's own code. behaviour |
| 1.0.0 | a list of the codes worth retrying, such as RATE_LIMITED and the 5xx one |
error.canRetry, on SDKError and TomTomMapError |
Search and places
| Since | Before | After |
|---|---|---|
| 0.52.0 | reverseGeocode with allowFreeformNewline, mapcodes, number, returnMatchType, returnRoadUse, returnSpeedLimit or roadUses |
removed, with the RoadUse type: reverse geocoding calls Orbis v2 |
| 0.52.0 | a reverse geocoding result's bounding box, side of street, offset position, mapcodes, data sources, road class and use, speed limit | not returned |
| 0.55.1 | { position, radiusMeters } on a search |
{ geoBias: { position, radiusMeters } } |
| 0.55.1 | { boundingBox } on a search |
{ geoBias: { boundingBox } } |
| 0.56.0 | explorationSearch, POPULATED_AREA_TAGS, RESERVED_AREA_TAGS |
no longer exported |
| 0.57.0 | SearchSummary.totalResults and fuzzyLevel always numbers |
optional |
| 0.58.0 | search(), searchOne(), placeById() |
discoverPlaces(), discoverOnePlace(), getPlaceDetails() |
| 0.58.0 | SearchResponse, PlaceByIdParams, PlaceByIdResponse |
DiscoverPlacesResponse, PlaceDetailsParams, PlaceDetailsResponse |
| 0.58.0 | autocompleteSearch() |
getSearchSuggestions({ query, filters: { kinds: ['brand', 'category'] } }), or without kinds for brands, categories and places ranked together |
| 0.58.0 | reverseGeocode({ geographyType }) |
reverseGeocode({ geographyTypes }) |
| 0.59.0 | poiCategories, poiBrands, indexes, geographyTypes, connectors, fuelTypes, minPowerKW, maxPowerKW, countries at the top level of a search |
under filters: { filters: { poiCategories: ['CAFE_PUB'] } } |
| 0.59.0 | { offset } for the next page, SearchSummary.offset |
{ cursor } set to the previous response's properties.nextCursor, unchanged |
| 0.59.0 | getPlaceWithEVAvailability and getPlacesWithEVAvailability resolved an aborted call as missing availability |
they reject with SDKAbortError |
| 0.61.0 | behaviour: getPOICategories and getPOICategoryCodes returned every category whose name contained a filter |
they return each filter's strongest matches: 'bar' gives Bar, not 15 categories |
| 0.61.0 | { view: 'IN' } on a search, suggestions, geocoding, reverse geocoding or place details call |
{ geopoliticalView: 'IN' }, or once for every call with TomTomConfig.instance.put({ geopoliticalView }) |
| 0.61.0 | alongRouteSearch({ route, maxDetourTimeSeconds, query, … }) |
discoverPlaces({ route, maxDetourTimeSeconds, query, … }), resolving to a DiscoverPlacesResponse |
| 0.61.0 | AlongRouteSearchResponse, FuzzySearchResponse, GeometrySearchResponse, GeometrySearchFeatureCollectionProps |
DiscoverPlacesResponse, and SearchSummary for the collection properties |
| 0.61.0 | the wire-format types of along-route, fuzzy and geometry search, such as FuzzySearchResponseAPI or GeometryAPI |
no longer exported, with no replacement |
| 0.64.0 | getSearchSuggestions({ maxResults, origin }) |
getSearchSuggestions({ limit, geoBias: { position } }), as the other searches name them |
| 0.64.0 | the geometry data wire-format types GeometryDataResponseAPI, AdditionalDataAPI |
no longer exported, with no replacement |
| 0.64.0 | evChargingStationsAvailability, getPlacesWithEVAvailability, getPlaceWithEVAvailability, hasChargingAvailability, ChargingStationsAvailabilityParams, PlacesWithEVAvailabilityOptions |
removed, with real-time EV charging availability: search results keep their static chargingPark |
Routing and reachable ranges
| Since | Before | After |
|---|---|---|
| 0.52.0 | VehicleDimensions with lengthMeters, widthMeters, heightMeters, axleWeightKG |
weightKG only |
| 0.52.0 | VehicleRestrictions with loadTypes, adrCode, commercial; LoadType, loadTypes |
maxSpeedKMH only |
| 0.52.0 | guidance: { version } |
guidance: { type: 'coded' } |
| 0.52.0 | a reachable range's costModel.avoidAreas, avoid: ['alreadyUsedRoads'] or vehicle.state.heading |
rejected: that endpoint takes none of them |
| 0.56.0 | chargingStopsStrategy on any vehicle |
needs vehicle.preferences.chargingPreferences |
| 0.56.0 | model.variantId on any vehicle |
electric vehicles only, and on calculateRoute only with charging preferences |
| 0.58.0 | guidance: { phonetics }, the Phonetics type |
removed |
| 0.58.0 | the reachable-range budget remainingChargeCPT |
remainingChargePCT |
| 0.58.0 | preferences on a generic or combustion vehicle, VehiclePreferences |
electric vehicles only, as ElectricVehiclePreferences |
| 0.58.0 | calculateReachableRange dropped when.arriveBy and a charge budget it could not convert |
it rejects them |
| 0.62.0 | import { budgetTypes, type BudgetType, type ReachableRangeBudget } from '@tomtom-org/maps-sdk/services' |
from '@tomtom-org/maps-sdk/core', beside the new budgetUnits |
| 0.64.0 | vehicle.engineType, vehicle.model.engine, vehicle.model.variantId, vehicle.state.currentChargePCT, currentChargeInkWh, currentFuelInLiters, vehicle.preferences |
removed: routes and reachable ranges are planned without a vehicle consumption model; vehicle takes model.dimensions.weightKG, state.heading and restrictions |
| 0.64.0 | calculateRoute({ vehicle: { preferences: { chargingPreferences } }, chargingStopsStrategy }), chargingStopsStrategies, ChargingStopsStrategy |
removed, with long-distance EV routing |
| 0.64.0 | the vehicle types ElectricVehicleParams, CombustionVehicleParams, GenericVehicleParams, ElectricVehicleParamsWithChargingStops, VehicleEngineType, ElectricVehiclePreferences, ChargingPreferences, ChargingPreferencesKWH, ChargingPreferencesPCT, ElectricVehicleState, ElectricVehicleStateKWH, ElectricVehicleStatePCT, CombustionVehicleState, GenericVehicleState, PredefinedVehicleModel, ExplicitVehicleModel, VehicleEngineModel, ElectricEngineModel, CombustionEngineModel, ConsumptionModelBase, ElectricConsumptionModel, CombustionConsumptionModel, ConsumptionModelEfficiency, SpeedToConsumptionRate, ChargingModel, BatteryCurve, ChargingConnector |
VehicleParameters, VehicleModel and VehicleState, with no engine variants |
Traffic
| Since | Before | After |
|---|---|---|
| 0.58.0 | trafficIncidentDetails({ trafficModelId }) |
removed: v2 always serves the latest traffic state |
| 0.58.0 | metricKeyToApiDataType |
no longer exported |
Map
TomTomMap and styles
| Since | Before | After |
|---|---|---|
| 0.53.0 | map.setStyle(style, { keepState: false }) |
await map.setStyle(style, { resetState: true }); state is kept by default, as before |
| 0.53.0 | setStyle returned nothing |
it returns a promise that settles once the modules are restored |
| 0.53.0 | a StyleChangeHandler callback received { keepState } |
it receives { resetState } |
| 0.53.0 | behaviour: overlays drew fixed colours on every style | on dark styles, geometry fills and labels, palettes, places connections, the area-analytics region boundary and the incident focus outline take dark-style colours. To keep a colour, set it |
| 0.56.0 | a CustomStyle with both url and json |
exactly one of the two |
| 0.58.0 | eventState held a user event type, such as hover or click |
it also holds recently-hovered for hoverGracePeriodMS (400 ms). Exclude it from your own ['has', 'eventState'] expressions, or set hoverGracePeriodMS: 0 |
| 0.59.0 | { version } on a standard style; DEFAULT_STYLE_VERSION |
removed: standard styles load the Orbis style version the SDK is verified against |
| 0.59.0 | a Record<MapColorName, …> over nine colours |
it needs an accent entry too |
| 0.62.0 | map.getStyle() |
map.getStyleInput(), the StyleInput as given; map.mapLibreMap.getStyle() returns the style specification |
| 0.62.0 | StyleModule, styleModules |
StylePart, styleParts |
| 0.62.0 | { type: 'standard', include: ['hillshade'] } |
{ type: 'standard', include: ['terrain'] } |
| 0.64.0 | TomTomMap({ mapLibre: { transformRequest } }) |
a type error. The SDK sets transformRequest itself, so the value never took effect. Route requests through a proxy with commonBaseURL |
| 1.0.0 | style: { type: 'custom', url } or { type: 'custom', json }; CustomStyle, CustomStyleSource, lightDarkTheme |
removed: the map loads standard styles only. Start from the closest one and restyle it with the Styling Foundations module and map colours |
| 1.0.0 | the standard style IDs standardLight, standardDark, drivingLight, drivingDark, satellite |
streetLight, streetDark, streetLightDriving, streetDarkDriving, streetSatellite, each the Orbis style it loads in camelCase. monoLight and monoDark stay |
Every module
| Since | Before | After |
|---|---|---|
| 0.52.0 | PlacesModule.get(map), likewise for RoutingModule, GeometriesModule, CustomGeoJSONModule, TrafficIncidentOverlayModule, TrafficAreaAnalyticsModule |
PlacesModule.create(map); style-owned modules keep get() (Map modules) |
| 0.52.0 | behaviour: each get() of a style-owned module built a new instance |
it returns the map's one instance |
| 0.52.0 | module.events.<scope>.on('config-change' or 'shown-features', …) |
module.events.on(…). A named scope carries only user events |
| 0.52.0 | module.events covered the main surface |
it covers every surface: places.events.places for pins typed as Place, geometries.events includes the labels |
| 0.58.0 | FlowConfig, IncidentsConfig, TrafficIncidentOverlayConfig, TrafficAreaAnalyticsConfig |
TrafficFlowModuleConfig, TrafficIncidentsModuleConfig, TrafficIncidentOverlayModuleConfig, TrafficAreaAnalyticsModuleConfig |
| 0.58.0 | the filter mode 'all_except' |
'all-except', in the POI, traffic flow and traffic incident filters |
| 0.61.0 | behaviour: isVisible() on POIsModule, BaseMapModule, TrafficFlowModule and TrafficIncidentsModule reported whether a layer draws |
it returns the visible setting. Until something sets it, POIs and the base map report what the style draws, and the traffic modules false. Read a layer with map.mapLibreMap.getLayoutProperty(layerId, 'visibility') |
| 0.61.0 | a subclass of AbstractDataOwnedMapModule with its own setVisible |
it implements applyVisibility(config) instead, and the base class provides setVisible and isVisible; its config type takes visible?: boolean |
| 0.62.0 | behaviour: a hovered or clicked route, geometry or incident details incident drew as any other | it stands out: a wider route outline, a denser geometry fill and wider border, the incident focus treatment. highlight.outlineWidthFactor: 1 on routes, highlight: { fillOpacityFactor: 1, lineWidthFactor: 1 } on geometries and focus: false on incident details keep the old look |
| 0.62.0 | behaviour: an event state wrote properties.eventState into the feature objects you passed to show |
your objects stay as given. Read states with getEventStates(), or from getShown(), which returns a new collection after each state change |
| 0.62.0 | behaviour: a user click or hover left the state putEventState gave another feature |
it moves the state. A click takes click and contextmenu off the other features of its source, a hover takes hover, hover-move and long-hover |
| 0.63.0 | mapDisplayPoiCategoryMappings, toBaseMapPOICategory, toBaseMapPOIGroup, baseMapPOICategoryValues, sharedInstanceIfCreated, SymbolLayerSpecWithoutSource |
no longer exported: they were internal; MapStylePOICategory stays |
| 0.64.0 | putEventState, cleanEventState, cleanEventStates on a data-owned module and its named scopes; PutEventStateOptions, CleanEventStateOptions, CleanEventStatesOptions |
setEventState, clearEventState, clearEventStates; SetEventStateOptions, ClearEventStateOptions, ClearEventStatesOptions |
| 0.64.0 | getShown() on POIsModule, TrafficFlowModule and TrafficIncidentsModule |
getRenderedFeatures(): what the style's tiles render in view; getShown() stays on the data-owned modules, the data show was given |
| 0.64.0 | EventsProxy, sharedInstance, TomTomMapSource, InternalTomTomMapParams, poiLayerIDs, buildRoutingLayers, ROUTE_LINE_OUTLINE_COLOR |
no longer exported: they were internal; ROUTE_LINE_OUTLINE_COLOR was '#105287' |
| 0.64.0 | renderedRefId, findFeatureByRefId, filterLayersBySources, withEventState, combineEventScopes, scopedLayerSpecs, reservedScopeNames, assertNoReservedScopeNames, getIconIDForPlace, getPOIGroupForPlace, getPOILayerCategoryForPlace, STOP_DISPLAY_LABEL |
no longer exported: they were internal; look a shown feature up by id in the module's getShown() |
Knob catalogues
| Since | Before | After |
|---|---|---|
| 0.61.0 | KnobKind with toggle, factor, number, color, enum, colors |
it adds image, offset, enums and text: an exhaustive switch needs a case for each |
| 0.61.0 | a KnobRange you declare as { min, max, step } |
it needs bounds: 'hard', 'hard-min' or 'soft', the ends validateKnobValue holds a value to |
| 0.61.0 | a StylingKnob with range and options optional on every kind |
one member per kind: a factor or number knob carries its range, an enum knob its options, and no other kind either |
| 0.61.0 | a module's …KnobValueOf<id> took the expressions and objects the config also takes at that path |
the plain value the knob holds |
| 1.0.0 | PlacesKnob admitted the text kind, and TrafficFlowKnob, TrafficIncidentsKnob, TrafficIncidentDetailsKnob and TrafficAreaAnalyticsKnob the image kind |
they list only the kinds their catalogues hold: drop a case 'text' or case 'image' from a switch over their kind |
BaseMapModule
| Since | Before | After |
|---|---|---|
| 0.52.0 | BaseMapModule.get(map, { layerGroupsFilter }), BaseMapModuleInitConfig |
name the groups per call: setVisible(visible, { layerGroups }), events.where({ layerGroups }) |
| 0.59.0 | layerGroupsVisibility: { mode: 'include', names: ['water', 'ferries'], visible: false } |
groups: { water: { visible: false }, ferries: { visible: false } } |
| 0.59.0 | layerGroupsVisibility: { mode: 'exclude', names: ['land', 'roads'], visible: false } |
visible: false, groups: { land: {}, roads: {} } |
| 0.59.0 | behaviour: applyConfig merged into the current configuration |
it replaces it; merge with updateConfig |
| 0.59.0 | behaviour: resetConfig left hidden groups hidden |
it puts every layer back as the style ships it |
| 0.63.0 | setVisible(visible, { layerGroups: { mode: 'include', names } }), mode: 'exclude', also in isVisible and events.where |
{ layerGroups: { show: 'only', values } }, show: 'all-except': the ValuesFilter POIs and traffic filter by |
POIsModule
| Since | Before | After |
|---|---|---|
| 0.61.0 | POICategoryGroup was string |
it is the union of the poiCategoryGroups names, such as 'FOOD_DRINKS_GROUP': a filterCategories value that names no group or category is a type error |
| 0.62.0 | pois.filterCategories(filter) |
pois.updateConfig({ filters: { categories: filter } }), and updateConfig({ filters: undefined }) to show every POI |
| 0.62.0 | pois.getShown().poi |
pois.getShown().pois |
| 0.64.0 | getStyleCategories |
no longer exported: it was internal; pois.updateConfig({ filters: { categories } }) filters the POIs by category or group |
StylingModule
| Since | Before | After |
|---|---|---|
| 0.56.0 | styling.set(id, value) accepted any knob value type |
a value of the wrong kind for that knob is a compile error |
| 0.57.0 | the view.terrain and view.terrainExaggeration knobs, the terrain preset |
TerrainModule.get(map, { elevation: true, elevationExaggeration }) |
| 0.58.0 | styling.describe(), StylingCatalogue, StylingKnobDescriptor, StylingPresetDescriptor, KnobDescriptor |
the static stylingKnobCatalogue and stylingPresetCatalogue, and styling.get(id) for the value in force |
| 0.59.0 | the basemap.roadShields knob |
roads.shields |
| 0.62.2 | behaviour: styling.layers queries also reached the layers modules add, such as route lines |
they reach only the style's own layers: restyle a module's layers through its layers config |
| 0.63.0 | StylingModule.get(map), StylingModuleConfig, StylingEvents |
StylingFoundationsModule.get(map), StylingFoundationsModuleConfig, StylingFoundationsEvents: it holds the foundations of the look, and every other part's look is the module drawing it (Map styling) |
| 0.63.0 | stylingKnobCatalogue, stylingKnobIds, StylingKnob, StylingKnobId, StylingKnobValueOf, StylingKnobValue, StylingKnobKind, StylingKnobRange, StylingKnobAppliesTo, stylingKnobKinds, stylingKnobAppliesTo |
stylingFoundationsKnobCatalogue, stylingFoundationsKnobIds, StylingFoundationsKnob, StylingFoundationsKnobId, StylingFoundationsKnobValueOf, StylingFoundationsKnobValue, StylingFoundationsKnobKind, StylingFoundationsKnobRange, StylingFoundationsKnobAppliesTo, stylingFoundationsKnobKinds, stylingFoundationsKnobAppliesTo |
| 0.63.0 | styling.set(id, value), styling.get(id), styling.reset(id) |
setKnob(styling, stylingFoundationsKnobCatalogue, id, value), getKnob(styling, stylingFoundationsKnobCatalogue, id), resetKnob(styling, stylingFoundationsKnobCatalogue, id), as on every module (Setting a knob by its id) |
| 0.63.0 | styling.reset() |
styling.resetConfig() |
| 0.63.0 | StylingSettings |
StylingFoundationsModuleConfig, as every other module names its configuration |
| 0.63.0 | the knobs basemap.<group>, buildings.footprints, buildings.3d and roads.shields |
the Base Map Module's groups: baseMap.setVisible(true, { layerGroups: { show: 'only', values: ['buildings3D'] } }), or setKnob(baseMap, baseMapKnobCatalogue, 'groups.buildings3D.visible', true); buildings2D and roadShields are the other two |
| 0.63.0 | the knobs roads.exitNumbers, roads.arrows, roads.restricted, roads.underConstruction |
the Base Map Module's roads.exitNumbers.visible, roads.arrows.visible, roads.restricted.visible, roads.underConstruction.visible: BaseMapModule.get(map, { roads: { arrows: { visible: false } } }) |
| 0.63.0 | the knobs pois.sizeFactor, pois.minZoom, pois.zoomShift |
the POIs Module's sizeFactor, minZoom, zoomShift: POIsModule.get(map, { sizeFactor: 1.2 }) |
| 0.63.0 | the knobs pois.labelColor, pois.labelOutlineColor |
POIsModule's label.color, label.haloColor: POIsModule.get(map, { label: { color, haloColor } }) |
| 0.63.0 | the knob pois.microMarkers |
POIsModule's microMarkers.visible |
| 0.63.0 | the knobs traffic.flow.freeColor, slowColor, queueingColor, stationaryColor, closedColor and traffic.flow.widthFactor |
the Traffic Flow Module's colors.free, colors.slow, colors.queueing, colors.stationary, colors.closed and widthFactor: TrafficFlowModule.get(map, { colors: { slow: '#f59e0b' } }) |
| 0.63.0 | the knobs traffic.incidents.minorColor, moderateColor, majorColor, closedColor and traffic.incidents.widthFactor |
the Traffic Incidents Module's colors.minor, colors.moderate, colors.major, colors.closed and widthFactor, which route traffic sections and incident details follow |
| 0.63.0 | the knobs hillshade.method, hillshade.lightDirection, hillshade.exaggeration, hillshade.maxZoom, hillshade.shadowColor, hillshade.highlightColor, hillshade.accentColor |
the same ids on the Terrain Module: TerrainModule.get(map, { hillshade: { visible: true, exaggeration: 0.5 } }) |
| 0.63.0 | StylingColorKnobId, stylingColorKnobIds |
StyleColorKnobId, styleColorKnobIds: the colour knobs of every module by their map-wide ids, such as 'colors.water', 'pois.label.color' and 'traffic.incidents.colors.major', which getStyleColor(map, id) reads (The knob catalogue) |
| 0.63.0 | styling.applyPreset(id), styling.applyPreset(id, { merge: true }) |
await applyMapPreset(map, id), { merge: true }: it sets the Styling Foundations, Base Map and POIs knobs each preset names, creating the modules the map lacks, and throws an Error for an unknown id (Presets) |
| 0.63.0 | stylingPresetIds, stylingPresetCatalogue, StylingPresetId, StylingPreset |
mapPresetIds, mapPresetCatalogue, MapPresetId, MapPreset; MapPresetSettings gives each module's values by its own catalogue ids |
| 0.63.0 | behaviour: the data-viz preset hid road shields and 3D buildings, night-driving showed the shields and hid 3D buildings, and minimal hid both building groups and the shields |
presets leave whole groups as the style ships them; hide those with BaseMapModule |
| 0.64.0 | the map colour labelOutline, its knob colors.labelOutline |
labelHalo, colors.labelHalo: the band around a label's text is its halo, as in every module's haloColor and haloWidth |
| 1.0.0 | the knob ids view.sky, view.skyColor, view.horizonColor and view.spaceColor, also as colour ids in styleColorKnobIds, getStyleColor and Map Effects' bloom.only |
view.sky.visible, view.sky.color, view.sky.horizonColor and view.space.color: the sky is a part with its own visible, and the space behind a globe another |
TerrainModule
| Since | Before | After |
|---|---|---|
| 0.57.0 | HillshadeModule.get(map, { visible: true }) |
TerrainModule.get(map, { hillshade: true }) |
| 0.57.0 | hillshadeModule.setVisible(visible) |
terrain.setHillshadeVisible(visible) |
| 0.61.0 | behaviour: isHillshadeVisible() reported whether a hillshade layer draws |
it returns the hillshade setting, false until something sets it |
| 0.61.0 | behaviour: isElevationEnabled() reported whether the map's terrain is raised |
it returns the elevation setting, and the map's own terrain until something sets it. Read the map with map.mapLibreMap.getTerrain() |
| 0.62.0 | terrain.setElevationExaggeration(2) |
terrain.updateConfig({ elevationExaggeration: 2 }) |
| 0.63.0 | TerrainModule.get(map, { hillshade: true, elevation: true, elevationExaggeration: 2 }) |
TerrainModule.get(map, { hillshade: { visible: true }, elevation: { visible: true, exaggeration: 2 } }) |
| 0.63.0 | the knob ids hillshade, elevation, elevationExaggeration |
hillshade.visible, elevation.visible, elevation.exaggeration |
| 0.63.0 | terrain.updateConfig({ elevationExaggeration: 2 }) |
setKnob(terrain, terrainKnobCatalogue, 'elevation.exaggeration', 2): updateConfig({ elevation: { exaggeration: 2 } }) replaces the whole elevation object, dropping visible |
| 0.63.0 | terrain.setElevationEnabled(visible), terrain.isElevationEnabled() |
terrain.setElevationVisible(visible), terrain.isElevationVisible() |
| 1.0.0 | TerrainModule.get(map, { hillshade: { lightDirection, exaggeration, shadowColor, highlightColor, accentColor } }) |
TerrainModule.get(map, { hillshade: { light: { direction }, intensity, colors: { shaded, lit, steep } } }): exaggeration is the raised surface's vertical scale alone |
| 1.0.0 | the knob ids hillshade.lightDirection, hillshade.exaggeration, hillshade.shadowColor, hillshade.highlightColor, hillshade.accentColor, also as terrain.-prefixed colour ids in styleColorKnobIds and getStyleColor |
hillshade.light.direction, hillshade.intensity, hillshade.colors.shaded, hillshade.colors.lit, hillshade.colors.steep |
PlacesModule
| Since | Before | After |
|---|---|---|
| 0.52.0 | the shown-features payload held the places |
it is either { places } or { connections }, and showConnections emits it too |
| 0.61.0 | PlacesModule.create(map, { theme: 'base-map' }) |
PlacesModule.create(map, { markerType: 'base-map' }) |
| 0.61.0 | places.applyTheme('pin') |
places.applyMarkerType('pin') |
| 0.61.0 | PlacesTheme, placesThemes |
PlacesMarkerType, placesMarkerTypes |
| 0.61.0 | PlacesModule.create(map, { text: { title, color } }) |
PlacesModule.create(map, { label: { title, color } }) |
| 0.61.0 | places.applyTextConfig({ color }), PlaceTextConfig |
places.applyLabelConfig({ color }), PlaceLabelConfig |
| 0.61.0 | behaviour: the EV availability label defaulted to a threshold of 0, drawing every station green, while the pin used 0.3 |
both default to 0.3: set evAvailability: { threshold: 0 } to keep the old label colour |
| 0.62.0 | places.applyMarkerType(type), applyIconConfig(icon), applyLabelConfig(label), applyExtraFeatureProps(props) |
places.updateConfig({ markerType, icon, label, extraFeatureProps }), typed by your place shape with updateConfig<MyPlaceProps>(…) |
| 0.62.0 | behaviour: on a dark map, connection labels and entry points had a near-black halo, and a color gave connection labels its darker shade |
they take the dark grey halo of place labels, and a lighter shade of the colour; connections.textColor and connections.haloColor set either |
| 0.62.2 | behaviour: a categoryIcons entry drew only the places of its own category |
it also draws the places of its map category that no entry names: RESTAURANT reaches an ITALIAN_RESTAURANT |
| 0.63.0 | PlacesModule.create(map, { evAvailability: { enabled: true } }), the knob evAvailability.enabled |
PlacesModule.create(map, { evAvailability: { visible: true } }), evAvailability.visible |
| 0.63.0 | connections: { label: (connection) => text, textColor, haloColor }, the knob ids connections.textColor, connections.haloColor |
connections: { label: { title: (connection) => text, color, haloColor } }, connections.label.color, connections.label.haloColor: the label of places, waypoints and geometries |
| 0.63.0 | cluster: { badge: { textColor, textSize } }, the knob ids cluster.badge.textColor, cluster.badge.textSize |
cluster: { badge: { label: { color, size } } }, cluster.badge.label.color, cluster.badge.label.size |
| 0.64.0 | cluster.badge.strokeColor, cluster.badge.strokeWidth, and their knob ids |
cluster.badge.outlineColor, cluster.badge.outlineWidth: the edge of a shape is its outline across the modules |
| 0.64.0 | PlacesModule.create(map, { evAvailability }), EVAvailabilityConfig, the knobs evAvailability.visible, evAvailability.threshold |
removed, with real-time EV charging availability |
| 0.64.0 | categoryIcons: [{ id, image, availabilityLevel }] on PlacesModule and POIsModule, AvailabilityLevel |
categoryIcons: [{ id, image }]: one icon per category |
| 1.0.0 | cluster: { source: { clusterRadius, clusterMaxZoom, clusterMinPoints, clusterProperties } }, the knob ids cluster.source.clusterRadius, cluster.source.clusterMaxZoom, cluster.source.clusterMinPoints |
cluster: { source: { radius, maxZoom, minPoints, properties } }, cluster.source.radius, cluster.source.maxZoom, cluster.source.minPoints; PlacesClusterSourceConfig types them |
| 1.0.0 | label: { offset }, the knob id label.offset |
label: { distance }, label.distance: an offset is an [x, y] displacement on every module |
RoutingModule
| Since | Before | After |
|---|---|---|
| 0.52.0 | routing.events.user.on('click', …) |
routing.events.on('click', …) |
| 0.52.0 | routing.events.module.on(…) |
routing.events.on(…) |
| 0.52.0 | WAYPOINT_SOFT_IMAGE_ID, softWaypointIcon: a circle for a soft waypoint |
removed: every waypoint draws a numbered pin |
| 0.54.0 | behaviour: the tollRoad section covered per-use tolls only |
it covers every stretch that costs money to drive |
| 0.55.1 | layers.sections.incident |
layers.sections.traffic |
| 0.55.1 | behaviour: sections.speedLimit drew a band, behind { visible: true } |
it posts speed-limit signs, by default |
| 0.55.1 | sections.speedLimit color, opacity, width, style, pattern, icon |
removed: it takes visible and sign |
| 0.55.1 | a layers.sections.speedLimit override of routeSectionSpeedLimitLine |
of routeSectionSpeedLimitSign |
| 0.55.1 | sections.country, the countrySections source, its events scope and getShown() entry |
removed: border crossings are labelled with countryCrossings |
| 0.59.0 | sections.<type>.sign.minzoom, countryCrossings.minzoom |
minZoom |
| 0.60.0 | { theme: { mainColor: '#f00', routeWidth: 'l', waypointSize: 's' } } |
{ color: '#f00', width: 'l', waypointSize: 's' }; RouteTheme is removed |
| 0.60.0 | sections.<type>.icon.size |
sections.<type>.icon.sizeFactor, clamped to 0.25–2 |
| 0.60.0 | getLayerToRenderLinesUnder() always returned a layer id |
it follows beforeLayerConfig, and returns undefined when the route lines are on top |
| 0.61.0 | behaviour: icon.sizeFactor: 0.8 set the icon size |
it multiplies the size the section type draws: ferry, tollRoad, tunnel and vehicleRestricted keep their zoom ramp |
| 0.61.0 | { chargingStops: { text: { title } } }, ChargingStopTextConfig, the knob id chargingStops.text.visible |
{ chargingStops: { label: { title } } }, ChargingStopLabelConfig, chargingStops.label.visible |
| 0.61.0 | behaviour: getConfig() filled in the global displayUnits when the module set none |
it returns the configuration as given, and undefined after RoutingModule.create(map) or resetConfig(): read TomTomConfig.instance.get().displayUnits for the units in force |
| 0.62.0 | behaviour: waypoint labels were black on a white halo on every map | they follow the light/dark theme; waypoints: { label: { color: 'black', haloColor: '#ffffff' } } keeps the old look |
| 0.62.2 | behaviour: a hovered or clicked waypoint drew as any other | once a handler covers the waypoints, its pin grows 1.2 times with its stop mark; waypoints: { highlight: { sizeFactor: 1 } } keeps the old look |
| 0.63.0 | RoutingModule.create(map, { waypointSize: 's', waypointSizeFactor: 1.5 }), the knob ids waypointSize, waypointSizeFactor |
RoutingModule.create(map, { waypoints: { size: 's', sizeFactor: 1.5 } }), waypoints.size, waypoints.sizeFactor |
| 0.63.0 | countryCrossings: { textColor }, the knob id countryCrossings.textColor |
countryCrossings: { label: { color } }, countryCrossings.label.color |
| 0.63.0 | ROUTE_WIDTH_FACTOR_RANGE, ROUTE_WAYPOINT_SIZE_FACTOR_RANGE, ROUTE_WAYPOINT_HIGHLIGHT_SIZE_FACTOR_RANGE, SECTION_ICON_SIZE_FACTOR_RANGE, ROUTE_HIGHLIGHT_OUTLINE_WIDTH_FACTOR_RANGE |
the knob's range in routingKnobCatalogue: knobEntryOf(routingKnobCatalogue, 'widthFactor').range |
| 0.63.0 | the undocumented route layer colours, widths and size helpers, such as ROUTE_LINE_FOREGROUND_COLOR or getWaypointIconSize |
no longer exported; SELECTED_ROUTE_FILTER and DESELECTED_ROUTE_FILTER stay |
| 0.64.0 | highlight: { outlineWidthFactor }, the knob highlight.outlineWidthFactor |
highlight: { outline: { widthFactor } }, highlight.outline.widthFactor: each module's highlight names the part it changes, then the property |
| 0.64.0 | RoutingModule.create(map, { chargingStops }), ChargingStopsConfig, ChargingStopIconConfig, ChargingStopIconMapping, ChargingSpeedIconMapping, ChargingStopLabelConfig, the knobs chargingStops.visible, chargingStops.label.visible, layers.chargingStops, routing.events.chargingStops, getShown().chargingStops |
removed, with long-distance EV routing |
| 1.0.0 | RoutingModule.create(map, { width: 'l', waypoints: { size: 's' } }), sections.<type>.width, the knob ids width, waypoints.size, sections.<type>.width |
RoutingModule.create(map, { widthPreset: 'l', waypoints: { sizePreset: 's' } }), sections.<type>.widthPreset, and the knob ids follow: a preset is named *Preset, next to the *Factor that multiplies it |
GeometriesModule
| Since | Before | After |
|---|---|---|
| 0.59.0 | { theme: 'inverted' }, GeometryTheme, geometryThemes |
{ fillStyle: 'inverted' }, GeometryFillStyle, geometryFillStyles |
| 0.59.0 | a feature's properties.theme |
properties.fillStyle |
| 0.59.0 | themedGeometryConfig |
fillStyledGeometryConfig, which takes an options object from 0.61.0 |
| 0.59.0 | textConfig: { textField }, GeometryTextConfig |
label: { text }, GeometryLabel; applyTextConfig({ text }). All three are renamed again in 0.61.0 |
| 0.59.0 | lineLabelConfig: { textSize, textColor, textHaloColor, textHaloWidth, textOpacity, textOffset }, GeometryLineLabelConfig |
lineLabel: { size, color, haloColor, haloWidth, opacity, offset }, GeometryLineLabel, which is GeometryLineLabelConfig again from 0.61.0 |
| 0.59.0 | fill.color as a legacy MapLibre function object ({ stops }) |
a colour or a MapLibre expression |
| 0.60.0 | fill: { beforeLayerConfig }, line: { beforeLayerConfig }, GeometryBeforeLayerTargets |
beforeLayerConfig: { fill, line } on the module, all covering the part it leaves out |
| 0.60.0 | behaviour: applyConfig without a target for a part left it where it was |
it puts that part back in its default place; moveBeforeLayer still leaves it |
| 0.61.0 | fill: { color: 'warm' }, a palette name |
fill: { palette: 'warm' } |
| 0.61.0 | geometries.applyTextConfig({ text }) |
geometries.applyLabelConfig({ text }) |
| 0.61.0 | GeometryLabel, GeometryLineLabel |
GeometryLabelConfig, GeometryLineLabelConfig |
| 0.61.0 | fillStyledGeometryConfig('retro', 'top') |
fillStyledGeometryConfig({ palette: 'retro', beforeLayerConfig: 'top' }) |
| 0.61.0 | reachableRangeGeometryConfig('cold', 'inverted', 'top', fn) |
reachableRangeGeometryConfig({ palette: 'cold', fillStyle: 'inverted', beforeLayerConfig: 'top', title: fn }) |
| 0.61.0 | prepareReachableRangesForDisplay(result, 'inverted', fn), ReachableRangeLabelFn |
prepareReachableRangesForDisplay(result, { fillStyle: 'inverted', title: fn }), ReachableRangeTitleFn |
| 0.62.0 | geometries.applyLabelConfig({ text }) |
geometries.updateConfig({ label: { text } }) |
| 0.62.0 | geometries.moveBeforeLayer(target), leaving a part the record names no target for where it was |
geometries.updateConfig({ beforeLayerConfig: target }), which puts that part back in its default place |
| 0.62.0 | fill: { palette: 'warm' }, a palette name; colorPalettes, colorPaletteIDs, ColorPaletteOptions |
fill: { palette: ['#793F0D', '#AC703D', …] }, a list of your own CSS colours, such as the ones the map-theme plugin's deriveMapColors returns |
| 0.62.0 | the fill.palette knob of geometriesKnobCatalogue, of kind enum |
of kind colors |
| 0.62.0 | behaviour: a palette name adapted its colours to dark map styles | the colours you give are drawn as given |
| 0.62.0 | behaviour: fillStyledGeometryConfig() without a palette coloured the features with fadedRainbow |
they draw in one colour, the map's accent or the default |
| 0.62.0 | GeometriesModule.create(map, reachableRangeGeometryConfig(options)), ReachableRangeGeometryConfigOptions |
ReachableRangesModule.create(map, options), ReachableRangesModuleConfig; without a palette, its bands ramp from the map's accent toward its land colour |
| 0.62.0 | prepareReachableRangesForDisplay, buildReachableRangeFeatures, ReachableRangesDisplayOptions |
ReachableRangesModule.show(result), which prepares the ranges itself |
| 0.62.2 | line: { layer }, drawn under the curated line fields |
deprecated: layers.line, which wins over them |
| 0.63.0 | line: { layer: { paint, layout } } |
removed: layers: { line: { paint, layout } }, which wins over the curated line fields; set a line-width there and it is drawn as given in every state |
| 0.63.0 | label: { text }, lineLabel: { text } |
label: { title }, lineLabel: { title }: the field that names a label's content on every module |
| 0.63.0 | ReachableRangesModule.create(map, { title: fn }) |
ReachableRangesModule.create(map, { label: { title: fn } }); ReachableRangesModuleSerializableConfig leaves out label.title |
| 0.63.0 | ReachableRangesModule.create(map, { palette }), the knob id palette |
ReachableRangesModule.create(map, { fill: { palette } }), fill.palette, as GeometriesModule takes it |
| 0.64.0 | highlight: { fillOpacityFactor, lineWidthFactor }, the knobs highlight.fillOpacityFactor, highlight.lineWidthFactor, also on ReachableRangesModule |
highlight: { fill: { opacityFactor }, line: { widthFactor } }, highlight.fill.opacityFactor, highlight.line.widthFactor |
| 0.64.0 | ReachableRangesModule's label, its knobs label.*, ReachableRangeLabelConfig |
lineLabel, lineLabel.*, ReachableRangeLineLabelConfig: the labels run along the borders, as GeometriesModule's lineLabel |
| 1.0.0 | GeometriesModule.create(map, { fillStyle: 'inverted' }), the knob id fillStyle, also on ReachableRangesModule |
GeometriesModule.create(map, { fill: { style: 'inverted' } }), fill.style; a feature's properties.fillStyle stays. updateConfig({ fill }) replaces the whole fill: spread the current one to keep its style |
TrafficFlowModule
| Since | Before | After |
|---|---|---|
| 0.62.0 | trafficFlow.filter(filters), trafficFlow.filter() |
trafficFlow.updateConfig({ filters }), updateConfig({ filters: undefined }) |
| 0.63.0 | filters: { any: [{ roadCategories }] }, the knob ids filters.any.0.* |
filters: { roadCategories }, filters.*: the fields of filters are one filter, and any adds the further ones a road may match instead; TrafficFlowFilters is FiltersWithAlternatives<TrafficFlowFilter> |
| 0.63.0 | showRoadClosures, the knob id filters.any.0.showRoadClosures |
roadClosures, filters.roadClosures |
TrafficIncidentsModule
| Since | Before | After |
|---|---|---|
| 0.59.0 | icons: { filters }, or a second argument to filter(lines, icons) |
the root filters, for lines and icons alike; icons takes { visible } only |
| 0.59.0 | IncidentsCommonConfig |
removed: IncidentIconsConfig is { visible } |
| 0.61.0 | behaviour: isVisible() was true while icons: { visible: true } drew the icons of hidden incidents |
it is false whenever the incidents are set hidden: anyIconLayersVisible() reads the icons, and isIconsVisible() from 0.62.0 |
| 0.62.0 | incidents.anyIconLayersVisible(), whether an icon layer draws |
incidents.isIconsVisible(), the icons.visible setting, or isVisible() while it is unset. Read a layer with map.mapLibreMap.getLayoutProperty(layerId, 'visibility') |
| 0.62.0 | incidents.filter(filters), incidents.filter() |
incidents.updateConfig({ filters }), updateConfig({ filters: undefined }) |
| 0.63.0 | filters: { any: [{ magnitudes }] }, the knob ids filters.any.0.* |
filters: { magnitudes }, filters.*: the fields of filters are one filter, and any adds the further ones an incident may match instead; TrafficIncidentsFilters is FiltersWithAlternatives<TrafficIncidentsFilter> |
| 1.0.0 | filters: { delays: { mustHaveDelay, minDelayMinutes } }, the knob ids filters.delays.mustHaveDelay, filters.delays.minDelayMinutes |
filters: { delays: { required, minMinutes } }, filters.delays.required, filters.delays.minMinutes |
TrafficIncidentDetailsModule
| Since | Before | After |
|---|---|---|
| 0.59.0 | focus: { widthScale: 1.6 } |
focus: { widthFactor: 1.6 }, clamped to 1–1.8 |
| 0.59.0 | behaviour: isVisible() reported whether anything was drawn |
it reports the visible setting; overlay.getShown().incidents.features.length > 0 says whether anything is drawn |
| 0.62.0 | overlay.moveBeforeLayer(target) |
overlay.updateConfig({ beforeLayerConfig: target }) |
| 0.62.0 | TrafficIncidentOverlayModule, TrafficIncidentOverlayModuleConfig, trafficIncidentOverlayKnobCatalogue, trafficIncidentOverlayKnobIds, TrafficIncidentOverlayKnob, TrafficIncidentOverlayKnobId, TrafficIncidentOverlayKnobValueOf |
TrafficIncidentDetailsModule, TrafficIncidentDetailsModuleConfig, trafficIncidentDetailsKnobCatalogue, trafficIncidentDetailsKnobIds, TrafficIncidentDetailsKnob, TrafficIncidentDetailsKnobId, TrafficIncidentDetailsKnobValueOf |
| 0.62.0 | sources and layers suffixed traffic-incident-overlay-N |
traffic-incident-details-N |
| 0.63.0 | INCIDENT_FOCUS_WIDTH_FACTOR_RANGE |
knobEntryOf(trafficIncidentDetailsKnobCatalogue, 'highlight.widthFactor').range |
| 0.63.0 | focus: { outlineColor, widthFactor } or focus: false, IncidentFocusStyle, the knob ids focus.outlineColor and focus.widthFactor |
highlight: { outlineColor, widthFactor } or highlight: false, IncidentHighlightConfig, highlight.outlineColor and highlight.widthFactor: the look of a focused, hovered or clicked incident, not the setFocus subset itself |
| 0.63.0 | layers.focusHalo, the layer id suffix -focus-halo |
layers.highlightHalo, -highlight-halo |
| 0.64.0 | highlight: { outlineColor, widthFactor }, the knobs highlight.outlineColor, highlight.widthFactor |
highlight: { outline: { color }, line: { widthFactor } }, highlight.outline.color, highlight.line.widthFactor |
TrafficAreaAnalyticsModule
| Since | Before | After |
|---|---|---|
| 0.59.0 | behaviour: applyConfig merged into the current configuration |
it replaces it: merge with updateConfig, change one metric with setColor, setHeight or filter given that metric |
| 0.59.0 | behaviour: isVisible() reported whether anything was drawn |
it reports the visible setting; read the heatmap, hexgrid and square collections of getShown() for what is drawn |
| 0.60.0 | beforeLayerConfig: { heatmap, hexgrid: { flat2D, extrusion3D }, square: { flat2D, extrusion3D } } |
keyed by display mode, 'hexgrid-2d', 'hexgrid-3d', 'square-2d', 'square-3d' and heatmap, plus all for the rest |
| 0.62.0 | analytics.setMode(mode), analytics.setMetric(metric), analytics.mode |
analytics.updateConfig({ displayMode: mode }), updateConfig({ activeMetric: metric }), analytics.getConfig()?.displayMode |
| 0.62.0 | behaviour: a style change emitted shown-features |
it no longer does, as on the other modules |
| 0.62.0 | analytics.filter(filters, metrics), analytics.clearFilter(metrics) |
analytics.setFilters(filters, metrics), setFilters(undefined, metrics) |
| 0.62.0 | analytics.moveBeforeLayer(target), leaving a display mode the record names no target for where it was |
analytics.updateConfig({ beforeLayerConfig: target }), which puts that mode back in its default place |
| 0.62.0 | AreaAnalyticsColorTheme |
AreaAnalyticsPalette; areaAnalyticsPalettes lists its names |
| 0.62.0 | metricConfig.<metric>.color: 'heat' |
metricConfig.<metric>.palette: 'heat'; a custom { valueType, stops } moves to colorStops |
| 0.62.0 | analytics.setColor('heat', metrics) |
analytics.setPalette('heat', metrics); use setColorStops(colorStops, metrics) for custom stops, and pass undefined to clear either |
| 0.62.0 | resolveColorStops('heat') |
resolveColorStops(metric, { palette: 'heat' }), which returns a { valueType, stops } config |
| 0.62.0 | getConfig().metricConfig.speed.color held the stops setColor('heat') expanded to |
getConfig().metricConfig.speed.palette holds 'heat'; read the stops with resolveColorStops |
| 0.62.0 | behaviour: a networkLength palette spanned the fixed 0–5,000 m range |
it spans the loaded range; set colorStops with valueType: 'relativeToPredefinedRangePCT' to keep the fixed range |
| 0.62.0 | a raw height's scaleFactor |
metersPerUnit, the metres of height per unit of the metric |
| 0.62.0 | the knob ids metricConfig.<metric>.color and metricConfig.<metric>.height.scaleFactor |
metricConfig.<metric>.palette and metricConfig.<metric>.height.metersPerUnit |
| 0.62.2 | behaviour: a metric filter with both min and max kept the cells within either |
it keeps the cells within both |
| 0.63.0 | metricConfig, its knob ids metricConfig.<metric>.* |
metrics, metrics.<metric>.*, as routing's sections.<type> |
| 0.63.0 | colorStops: { valueType: 'relativeToPredefinedRangePCT' }, 'relativeToActualRangePCT', AreaAnalyticsValueType |
colorStops: { scaleMode: 'predefinedRange' }, 'currentRange', AreaAnalyticsScaleMode: the vocabulary of the height's scaleMode |
| 0.63.0 | regionPolygon: { fillOpacity, outlineOpacity, outlineWidth, inverted: true } |
regionPolygon: { fill: { opacity }, line: { opacity, width }, fillStyle: 'inverted' }, as GeometriesModule names them; the knob ids follow |
| 1.0.0 | height: { maxHeightMeters, minHeightMeters }, setHeight({ maxHeightMeters }), the knob ids metrics.<metric>.height.maxHeightMeters, metrics.<metric>.height.minHeightMeters |
height: { maxMeters, minMeters }, setHeight({ maxMeters }), metrics.<metric>.height.maxMeters, metrics.<metric>.height.minMeters |
| 1.0.0 | regionPolygon: { fillStyle: 'inverted' }, the knob id regionPolygon.fillStyle |
regionPolygon: { fill: { style: 'inverted' } }, regionPolygon.fill.style, as GeometriesModule takes it |
CustomGeoJSONModule
| Since | Before | After |
|---|---|---|
| 0.52.0 | shown-features subscribed per source scope |
customModule.events.on('shown-features', ({ sourceName, data }) => …) on the module |
| 0.52.0 | a source named on, off or where |
not allowed: rename the source |
| 0.61.0 | behaviour: show() drew the layers of a module hidden with setVisible(false) or visible: false |
they stay hidden, and the data draws on setVisible(true): call it where show() used to reveal them |
| 0.64.0 | beforeID on a layer, a raw MapLibre layer id |
beforeLayerConfig: 'top', a style layer such as 'lowestLabel', or { layerID } for a layer outside the style; beforeLayerConfig on the module places the layers that set none |
Plugins
Each plugin declares the first SDK release it needs, up to <1.0.0, plus the 1.0.0 release candidates:
| First SDK release needed | Plugin releases |
|---|---|
| 0.61.0 | Map Effects 0.1.2, Viewport Places 0.5.1, Map Theme 0.2.2, Flyover 0.0.2 |
| 0.62.0 | Agent Toolkit 0.11.0, Landmarks 3D 0.0.8 |
| 0.63.0 | Agent Toolkit 0.12.0, Map Effects 0.2.0, Map Theme 0.2.3, and the next release of every other plugin |
| 0.64.0 | Agent Toolkit 0.13.0, Map Effects 0.2.1, Map Theme 0.3.0, Flyover 0.0.3, and the next release of every other plugin |
| 1.0.0-rc.0 | Agent Toolkit 0.14.0 |
The Since column below is the plugin's own version.
Agent Toolkit
| Since | Before | After |
|---|---|---|
| 0.6.1 | FeatureFlags.experimentalSearch; summarizePlace(place, flags), summarizePlaces(places, flags) |
removed; summarizePlace(place), summarizePlaces(places) |
| 0.7.0 | the toggleTilesBaseMapLayerGroups tool |
setMapStyling with the basemap.<group>, buildings.footprints and buildings.3d knobs |
| 0.7.0 | BaseMapState.getHillshadeModule |
removed, with HillshadeModule |
| 0.8.0 | the describeMapStyling tool |
removed: setMapStyling's schema names every knob with its range or values |
| 0.8.0 | 'all_except' in toggleTilesPOIs and recallState |
'all-except' |
| 0.9.0 | theme on findReachableAreas, processData, updatePlacesDisplay, locatePlace, discoverPlaces geometries; _shownTheme |
fillStyle; _shownFillStyle |
| 0.10.0 | updateRoutesDisplay({ mainColor }), RoutingState.mainColor, RoutingState.setMainColor |
updateRoutesDisplay({ color }), RoutingState.color, RoutingState.setColor |
| 0.11.0 | behaviour: getCurrentLocation sent the model the exact position, the device's accuracy and the timestamp of a fresh high-accuracy fix |
it sends the position rounded to 3 decimals (about 100 m), accuracy of at least 111 m and no timestamp: tools: { getCurrentLocation: createGetCurrentLocationTool({ fullPrecision: true }) } keeps the exact one (Tools) |
| 0.11.0 | RangeState.getEntryGeometriesModule(id) drew the entry's reachable ranges |
RangeState.getEntryRangesModule(id) returns its ReachableRangesModule; getEntryGeometriesModule returns a plain GeometriesModule for polygons in a style of your own |
| 0.11.0 | updateTrafficAreaAnalyticsDisplay({ colorTheme: 'heat' }) |
updateTrafficAreaAnalyticsDisplay({ palette: 'heat' }) |
| 0.11.0 | updateTrafficAreaAnalyticsDisplay({ heightScale: 200 }) |
{ maxHeightMeters: 200 } for predefinedRange or currentRange; { metersPerUnit: 200 } selects raw |
| 0.11.0 | behaviour: place boundaries and custom geometries drew one rainbow colour each | they draw in the map's accent; outlined ones keep a neutral grey border |
| 0.12.0 | setMapStyling with the basemap.<group>, buildings.footprints, buildings.3d and roads.shields knobs |
toggleTilesBaseMapLayerGroups({ visible, layerGroups }), which also reports the groups hidden afterwards |
| 0.12.0 | setMapStyling with pois.labelColor, traffic.flow.slowColor, roads.arrows and the other knobs that left StylingModule |
the map-wide ids of the module owning each: pois.label.color, traffic.flow.colors.slow, roads.arrows.visible, terrain.hillshade.exaggeration; preset applies a map preset, and reset: true resets the look knobs of every module the map has |
| 0.12.0 | BaseMapState.getStylingModule() |
BaseMapState.getStylingFoundationsModule() |
| 0.14.0 | setMapStyling with view.sky, view.skyColor, view.horizonColor, view.spaceColor |
view.sky.visible, view.sky.color, view.sky.horizonColor, view.space.color, the SDK's ids |
| 0.14.0 | toggleTilesBaseMapLayerGroups({ visible, layerGroups }) |
setMapStyling with visible and groups.<group>.visible; settings lists every knob set, in place of the hidden groups |
| 0.14.0 | toggleTilesPOIs |
setMapStyling with pois.visible and pois.filters.categories.show / .values |
| 0.14.0 | toggleTilesTrafficFlow, toggleTilesTrafficIncidents |
setMapStyling with traffic.flow.visible, traffic.incidents.visible and their filters.* knobs |
| 0.14.0 | behaviour: setMapStyling({ reset: true }) reset the look knobs only |
it resets every knob, what the map shows included |
| 0.14.0 | setPaintProperties({ changes: [{ layerId, propertyName, value }] }), setLayoutProperties (same shape) |
setLayerProperties({ changes: [{ layerId, paint?, layout? }] }), each a record of property name to value |
| 0.14.0 | updateRoutesDisplay({ color }), RoutingState.color, RoutingState.setColor(color) |
setMapStyling({ set: { 'routes.color': color } }), RoutingState.knobs.values.color, RoutingState.knobs.set('color', color) |
| 0.14.0 | updateTrafficAreaAnalyticsDisplay({ mode, metric, palette, scaleMode, maxHeightMeters, metersPerUnit, filter }) |
setMapStyling with traffic.areaAnalytics.displayMode, .activeMetric and .metrics.<metric>.palette, .height.scaleMode, .height.maxMeters, .height.metersPerUnit, .filters.min / .max |
| 0.14.0 | CustomGeometriesEntry._shownFillStyle |
removed: the entry's module holds its fill style |
Map Effects
| Since | Before | After |
|---|---|---|
| 0.1.0 | effects.describe(), MapEffectsCatalogue, MapEffectsKnobDescriptor |
the static effectKnobCatalogue, and getKnob(effects, effectKnobCatalogue, id) for the value in force |
| 0.2.0 | effects.set(settings) |
effects.updateConfig(settings), or setKnob(effects, effectKnobCatalogue, id, value) for one knob |
| 0.2.0 | effects.get(id), effects.reset(id) |
getKnob(effects, effectKnobCatalogue, id), resetKnob(effects, effectKnobCatalogue, id) |
| 0.2.0 | effects.reset() |
effects.resetConfig() |
| 0.2.0 | bloom.only naming 'traffic.incidents.majorColor', 'pois.labelColor' |
the map-wide ids 'traffic.incidents.colors.major', 'pois.label.color' (Bloom) |
| 0.2.0 | StylingColorKnobGroup |
StyleColorKnobGroup |
Map Theme
| Since | Before | After |
|---|---|---|
| 0.2.0 | deriveMapColors, deriveMapColorsFromCss and deriveMapColorsFromImage returned nine colours |
they also return accent, which setMapColors rejects before SDK 0.59.0: upgrade both together |
| 0.3.0 | deriveMapColors, deriveMapColorsFromCss and deriveMapColorsFromImage returned labelOutline |
they return labelHalo, the name SDK 0.64.0 takes |
Viewport Places
| Since | Before | After |
|---|---|---|
| 0.3.0 | searchOptions: { geoBias } |
removed: each module searches the current viewport |
| 0.4.0 | remove(id) logged an unknown id |
it throws, as update does |
| 0.5.0 | searchOptions: { poiCategories } |
searchOptions: { filters: { poiCategories } }; no cursor |
Related guides
- Map modules, for the two kinds of module and who owns what
- Proxying API calls, for the headers the services send
- Migrating from V6